一般來講，高效氣浮設備主要是由兩大部分組成，一部分是加壓溶氣及釋放系統，另一部分是氣浮池，前者包括加壓泵、水射器、溶氣罐、溶氣干管、溶氣支管以及高效氣浮噴頭等，后者包括吸附、分離、刮渣以及排水等部分。

      在實際中，除了這兩大部分，其實還有一些配套裝置，包括污水上水泵、混凝反應槽以及浮渣后處理等，其中污水上水泵是必須要的，而混凝反應槽則可以根據水質的需要來選擇。

      了解了高效氣浮設備的組成，下面來簡單說一下它的技術性能要求，具體如下。

      工作壓力：高效氣浮設備的工作壓力一般為0.3—0.35MPa。

      加壓泵：一般是采用單級離心泵，其吸水管路是氣浮池回流出水口與加壓泵進水口之間的管路。

      水射器：主要是用來吸入適量的空氣到溶氣罐中，包括進水閥和進氣閥等部件。

      溶氣罐：主要是用來溶解空氣，從而形成溶氣水，一般在溶氣罐上有壓力表，用來顯示壓力。而且，它的底部有閥門，可以進行排空操作。

      溶氣干管、溶氣支管：溶氣干管是與溶氣罐的出水口相連的，上面有若干溶氣管；溶氣支管上裝有活接頭，這樣能方便支管進行拆裝。

      刮渣機：一般是選用旋轉式刮渣機，可以將浮渣刮出，它一般配有減速機，在使用時注意減速機每隔半年要更換一次潤滑油。

      出水閘槽：它可以用來調節氣浮池水位的高低。

      排空管：功能是對氣浮池進行排污操作，或者將池內的水排空。所以，高效氣浮裝置工作時，閥門應是關閉狀態。

      我公司專業生產銷售氣浮機刮吸泥機氣浮氣浮設備砂濾罐本文由www.wxwoma.com提供

    

      In general, efficient air floating device is mainly composed of two parts, part is pressurized dissolved air and release system, the other part is air-float pond, the former including pump, water ejector, dissolving tank, dissolved gas, dissolved gas main pipe and efficient air-flotation nozzle, etc., which includes adsorption, separation, scraping the slag and drainage and other parts.

In practice, in addition to these two parts, there are some supporting device, including sewage pump, the coagulation reaction tank and sludge treatment etc, including sewage pump is a must, and the coagulation reaction tank can choose according to the needs of the water quality.

Understand the composition of the efficient air floating device, the following simple said its technical performance requirements, specific as follows.

Job stress: efficient air floating device work pressure average of 0.3-0.35 MPa.

Pump: usually adopts single-stage centrifugal pump, the suction pipe is floating pool backflow pipe between the outlet and the pump inlet.

Water ejector: mainly used for just the right amount of air inhaled into the dissolving tank, including inlet valve and inlet valve and other components.

Dissolving tank: mainly used for dissolving air, thus forming a dissolved air water, general pressure gauge in the dissolving tank, used to display the pressure. Moreover, it is at the bottom of the valve, emptying operations.

Dissolved air, dissolved gas main pipe: dissolved air main pipe is connected with the outlet of the dissolved gas, which has a number of dissolving the trachea; Mounted on the dissolved air pipe union, it can convenient branch pipe for dismantling.

Scraping the slag machine: usually choose machine, rotary scraping the slag can be scrape scum, it usually equipped with a speed reducer and attention when use reducer to replace a lubricating oil every six months.

Out of the gate slot: it can be used to adjust the gas floated to the surface of the water level.

Drain pipe: the function is to drainage operation of floating pool, or the emptying of the water in the pool. Therefore, efficient air floating device is working, the valve should be closed.